Коммутатор оптических сигналов MXS-9100
MXS-9100 - MEMS matrix optical switch
Jointly developed with DiCon, this all-optical cross-connect technology is optimized for EXFO systems and software, providing fast protection switching at the fiber layer, automation of test sequences and instrument-grade performance.
Характеристики
Производитель
—
EXFO
Модель
—
MXS-9100
Коммутатор оптических сигналов MXS-9100
MXS-9100 - MEMS matrix optical switch
Jointly developed with DiCon, this all-optical cross-connect technology is optimized for EXFO systems and software, providing fast protection switching at the fiber layer, automation of test sequences and instrument-grade performance.
Key features
The DiCon Fiberoptics MXS-9100 MEMS MxN Matrix Optical Switch is optimized for use with EXFO systems and software control. This high-speed, high-performance fiber-optic switch allows any number of M input fibers to connect to any number of N output fibers in a fully non‑blocking manner.
Housed in the 1U dedicated chassis, this all optical cross-connect technology provides the unique combination of low insertion loss, fast switching and very high reliability required by engineers in their lab or manufacturing environments.
With its remote-control capabilities using SCPI over Ethernet, the MXS-9100 is the perfect solution for sharing centralized instruments or automated tests in manufacturing environments.
Jointly developed with DiCon, this all-optical cross-connect technology is optimized for EXFO systems and software, providing fast protection switching at the fiber layer, automation of test sequences and instrument-grade performance.
Key features
- Available in various configurations, from 2x8 up to 96x96
- Protocol and bit-rate independent
- Fast switching time; less than 40 ms
- High reliability; lifetime > 10⁹ cycles
- SCPI-over-Ethernet remote-control capabilities
The DiCon Fiberoptics MXS-9100 MEMS MxN Matrix Optical Switch is optimized for use with EXFO systems and software control. This high-speed, high-performance fiber-optic switch allows any number of M input fibers to connect to any number of N output fibers in a fully non‑blocking manner.
Housed in the 1U dedicated chassis, this all optical cross-connect technology provides the unique combination of low insertion loss, fast switching and very high reliability required by engineers in their lab or manufacturing environments.
With its remote-control capabilities using SCPI over Ethernet, the MXS-9100 is the perfect solution for sharing centralized instruments or automated tests in manufacturing environments.
Документы
MxN MATRIX, MXS-9100 OPTICAL SWITCH
OPTICAL SPECIFICATIONS 1,2
1. Specifications referenced without connectors at 23 ± 5℃.
Add 0.2 dB for connector loss.
2. Specifications valid when wavelength is set to the wavelength range in use
(C, L, O or U band).
3. Insertion Loss (IL) specification is defined at 1550 nm (C band).
Operation at 1310 nm (O band) adds 0.1 dB typical, 0.2 dB max.
Operation at 1590 nm (L band) adds 0.1 dB typical, 0.2 dB max.
Operation at 1625 nm (U band) adds 0.2 dB typical, 0.4 dB max.
4. WDL is measured in a +/- 20 nm range centered at the set wavelength
(1310, 1550, 1590 or 1625 nm). Operation in U band adds 0.1 dB to the max.
5. Repeatability is defined within 100 cycles.
ELECTRICAL SPECIFICATIONS
MECHANICAL SPECIFICATIONS
OPTICAL SPECIFICATIONS 1
1. Specifications referenced without connectors at 23 ± 5 oC.
Add 0.4 dB for connector loss.
2. Insertion Loss (IL) specification is defined at 1550 nm & 1625 nm.
Operation at 1310 nm adds 0.2 dB max.
3. WDL is defined within a wavelength band, and is measured over
1290 - 1330 nm, 1530 - 1570 nm, and 1605 - 1641 nm.
4. Repeatability is defined within 100 cycles.
ELECTRICAL SPECIFICATIONS
MECHANICAL SPECIFICATIONS
CHASSIS SIZE
MULTIMODE 1XN, MXS-9100 OPTICAL SWITCH
OPTICAL SPECIFICATIONS 1
1. Specifications referenced without connectors at 23 ± 5 oC.
Add 0.4 dB for connector loss.
2. Insertion Loss (IL) specification is based upon using a LED source
for a full modefill condition. Underfilled sources, such as VCSELs, will
have a lower insertion loss.
3. Optical off state isolation is the same as the crosstalk specification.
4. Repeatability is defined within 100 cycles.
ELECTRICAL SPECIFICATIONS
MECHANICAL SPECIFICATIONS
CHASSIS SIZE
OPTICAL SPECIFICATIONS 1,2
| PARAMETER | RATING |
| Insertion Loss 3 |
0.8 dB typical 1.4 dB max |
| Crosstalk |
-70 dB typical -55 dB max. |
| Back Reflection |
-55 dB typical -45 dB max. |
| Switching Time |
15 ms typical 20 ms max. |
| WDL 4 |
1.3 dB max. for 2x8 to 16x16 1.4 dB max. for 24x24 to 96x96 |
| PDL |
0.08 dB typical 0.25 dB max. |
| Repeatability 5 |
0.01 dB typical 0.06 dB max. |
| Optical Power | 500 mW max. |
| Operating Temperature | 0 to 50 oC |
| Storage Temperature | -20 to 60 oC |
| Relative Humidity | 0% to 80% non-condensing |
| Fiber Type | 9/125 um singlemode |
| Operating Wavelength Range | 1290 - 1650 nm |
1. Specifications referenced without connectors at 23 ± 5℃.
Add 0.2 dB for connector loss.
2. Specifications valid when wavelength is set to the wavelength range in use
(C, L, O or U band).
3. Insertion Loss (IL) specification is defined at 1550 nm (C band).
Operation at 1310 nm (O band) adds 0.1 dB typical, 0.2 dB max.
Operation at 1590 nm (L band) adds 0.1 dB typical, 0.2 dB max.
Operation at 1625 nm (U band) adds 0.2 dB typical, 0.4 dB max.
4. WDL is measured in a +/- 20 nm range centered at the set wavelength
(1310, 1550, 1590 or 1625 nm). Operation in U band adds 0.1 dB to the max.
5. Repeatability is defined within 100 cycles.
ELECTRICAL SPECIFICATIONS
| PARAMETER | RATING |
| Latching Type | Non-latching |
| Control Type | Ethernet Interface with EXFO SCPI Command Set |
| Supply Voltage | AC 100 - 240 V, 50/60 Hz |
MECHANICAL SPECIFICATIONS
| PARAMETER | RATING |
| Housing Size, 2x8 to 16x16 |
Height: 43.65 mm (1U) Width: 483 mm (19”) Depth: 342 mm |
| Housing Size, 24x24 to 32x32 |
Height: 88.0 mm (2U) Width: 483 mm (19”) Depth: 434.5 mm |
| Housing Size, 48x48 to 96x96 |
Height: 177 mm (4U) Width: 483 mm (19”) Depth: 434.5 mm |
SINGLEMODE 1xN, MXS-9100 OPTICAL SWITCH
OPTICAL SPECIFICATIONS 1
| PARAMETER | RATING |
| Insertion Loss 2 | 0.7 dB max |
| Crosstalk | -50 dB max. |
| Back Reflection | -50 dB max. |
| Switching Time | 30 ms max. |
| WDL 3 | 0.5 dB max. |
| PDL | 0.15 dB max. |
| Repeatability 4 | 0.02 dB max. |
| Optical Power | 500 mW max. |
| Operating Temperature | 0 to 50 oC |
| Storage Temperature | -20 to 60 oC |
| Relative Humidity | 0% to 80% non-condensing |
| Fiber Type | 9/125 um singlemode |
| Operating Wavelength Range | 1290 - 1650 nm |
1. Specifications referenced without connectors at 23 ± 5 oC.
Add 0.4 dB for connector loss.
2. Insertion Loss (IL) specification is defined at 1550 nm & 1625 nm.
Operation at 1310 nm adds 0.2 dB max.
3. WDL is defined within a wavelength band, and is measured over
1290 - 1330 nm, 1530 - 1570 nm, and 1605 - 1641 nm.
4. Repeatability is defined within 100 cycles.
ELECTRICAL SPECIFICATIONS
| PARAMETER | RATING |
| Latching Type | Non-latching |
| Control Type | Ethernet Interface with EXFO SCPI Command Set |
| Supply Voltage | AC 100 - 240 V, 50/60 Hz |
MECHANICAL SPECIFICATIONS
| CHASSIS SIZE | RATING |
| 1U |
Height: 43.65 mm Width: 483 mm (19”) Depth: 342 mm |
| 2U |
Height: 88.0 mm Width: 483 mm (19”) Depth: 434.5 mm |
| 4U |
Height: 177 mm (4U) Width: 483 mm (19”) Depth: 434.5 mm |
CHASSIS SIZE
|
NUMBER OF SWITCHES |
1x4 | 1x8 | ||||
|
FC/APC FC/UPC |
LC/APC LC/UPC |
SC/APC SC/UPC |
FC/APC FC/UPC |
LC/APC LC/UPC |
SC/APC SC/UPC |
|
| 1 | 1U | 1U | 1U | 1U | 1U | 1U |
| 2 | 1U | 1U | 1U | 1U | 1U | 1U |
| 4 | 1U | 1U | 1U | 1U | 1U | 1U |
| 6 | 1U | 1U | 1U | 2U | 1U | 2U |
| 8 | 2U | 1U | 1U | 4U | 1U | 2U |
MULTIMODE 1XN, MXS-9100 OPTICAL SWITCH
OPTICAL SPECIFICATIONS 1
| PARAMETER | RATING | |
| Insertion Loss 2 | 1x4 | 1.3 dB max. |
| 1x8, 50 um | 1.5 dB max. | |
| 1x8, 62.5 um | 1.8 dB max. | |
| 1x12 | 2.0 dB max. | |
| Crosstalk 3 | 50 um | -25 dB max. |
| 62.5 um | -20 dB max. | |
| Back Reflection | -20 dB max. | |
| Switching Time | 30 ms max. | |
| Repeatability 4 | 0.02 dB max. | |
| Optical Power | 500 mW max. | |
| Operating Temperature | 0 to 50 oC | |
| Storage Temperature | -20 to 60 oC | |
| Relative Humidity |
0% to 80% non-condensing |
|
| Fiber Type | 50/125 um multimode, or 62.5/125 um multimode | |
| Operating Wavelength Range | 850 & 1310 nm | |
1. Specifications referenced without connectors at 23 ± 5 oC.
Add 0.4 dB for connector loss.
2. Insertion Loss (IL) specification is based upon using a LED source
for a full modefill condition. Underfilled sources, such as VCSELs, will
have a lower insertion loss.
3. Optical off state isolation is the same as the crosstalk specification.
4. Repeatability is defined within 100 cycles.
ELECTRICAL SPECIFICATIONS
| PARAMETER | RATING |
| Latching Type | Non-latching |
| Control Type | Ethernet Interface with EXFO SCPI Command Set |
| Supply Voltage | AC 100 - 240 V, 50/60 Hz |
MECHANICAL SPECIFICATIONS
| CHASSIS SIZE | RATING |
| 1U |
Height: 43.65 mm Width: 483 mm (19”) Depth: 342 mm |
| 2U |
Height: 88.0 mm Width: 483 mm (19”) Depth: 434.5 mm |
| 4U |
Height: 177 mm (4U) Width: 483 mm (19”) Depth: 434.5 mm |
CHASSIS SIZE
| # OF SWITCHES | 1x4 | 1x8 | 1x12 | |||
| FC | SC | FC | SC | FC | SC | |
| 1 | 1U | 1U | 1U | 1U | 1U | 1U |
| 2 | 1U | 1U | 1U | 1U | 1U | 1U |
| 4 | 1U | 1U | 1U | 1U | 2U | 2U |
| 6 | 1U | 1U | 2U | 2U | - | - |
| 8 | 2U | 1U | 4U | 2U | - | - |