Векторный анализатор цепей E5061B
Solid performance in an enhanced platform
Характеристики
Производитель
—
Keysight Technologies
Модель
—
E5061B
Векторный анализатор цепей E5061B
Advanced Measurement Capabilities in a Compact Box
The Keysight E5061B addresses a broad range of measurement needs of electronic components and circuits from low to high frequencies. The E5061B is the ideal solution for applications in industries such as wireless communications, aerospace and defense, computer, medical, automotive, CATV, plus many more.
- Select the best configuration for your test needs from a wide variety of test set options: 100 kHz to 1.5 GHz/ 3 GHz, 2-port, 50 or 75-ohm, transmission/reflection or S-parameter test set
- Measure from 5 Hz to 500 MHz/1.5 GHz/3 GHz with option LF-RF NA
- Combine network analysis and impedance analysis to customize your application in a single instrument (Option 3L5/3L4/3L3 plus 005)
Документы
S-Parameter Measurement
Corrected system performance
The specifications in this section apply for measurements made with the Keysight Technologies,
Inc. E5061B ENA vector network analyzer with the following conditions:
1. The test port dynamic range is calculated as the difference between the test port rms noise floor and
the source maximum output power. The effective dynamic range must take measurement uncertainty
and interfering signals into account.
2. The specification might not be met at the frequencies 1.4 MHz, 4.0 MHz, 4.333 MHz, 6.167 MHz,
6.333 MHz, 25 MHz and 90 MHz.
Uncorrected System Performance
Table 10. Uncorrected system performance (correction: off)
Test Port Output (Source)
Table 11. Test port output frequency
Table 12. Test port output power
Table 13. Test port output signal purity
1. The specification might not be met at the frequencies 25 MHz and 90 MHz Line and Fan related frequency.
2. Maximum test port input level: +10 dBm
Table 16. Test port input (trace noise)
Table 17. Test port input (stability)
Table 18. Test port input (dynamic accuracy)
Accuracy of the test port input power reading is relative to –10 dBm reference input power level.

Corrected system performance
The specifications in this section apply for measurements made with the Keysight Technologies,
Inc. E5061B ENA vector network analyzer with the following conditions:
- No averaging applied to data
- Environmental temperature of 23 °C ± 5 °C, with less than 1 °C deviation from the calibration temperature
- Response and isolation calibration not omitted
Description | Specification | SPD |
System dynamic range | ||
(Option 3L3/3L4/3L5) | ||
100 kHz to 1 MHz, 3 kHz IF bandwidth | 90 dB | |
1 MHz to 3 GHz, 3 kHz IF bandwidth | 95 dB | |
5 to 100 Hz, 2Hz IF bandwidth | 90 dB | |
100 Hz to 9 kHz,10 Hz IF bandwidth | 100 dB | |
9 to 100 kHz, 10 Hz IF bandwidth | 110 dB | |
100 kHz to 1 MHz, 10 Hz IF bandwidth | 115 dB | |
1 MHz to 3 GHz, 10 Hz IF bandwidth | 120 dB | 130 dB |
(Option 115, 135, 215, 235, 117, 137, 217, 237) | ||
100 to 300 kHz, 3 kHz IF bandwidth 75 dB | 75 dB | |
300 kHz to 1 MHz, 3 kHz IF bandwidth 90 dB | 90 dB | |
1 MHz to 3 GHz, 3 kHz IF bandwidth 95 dB | 95 dB | |
100 to 300 kHz, 10 Hz IF bandwidth 100 dB | 100 dB | |
300 kHz to 1 MHz, 10 Hz IF bandwidth | 115 dB | |
1 MHz to 3 GHz, 10 Hz IF bandwidth | 120 dB | |
100 to 300 kHz, 3 kHz IF bandwidth | 75 dB | |
300 kHz to 1 MHz, 3 kHz IF bandwidth | 90 dB | 130 dB |
1. The test port dynamic range is calculated as the difference between the test port rms noise floor and
the source maximum output power. The effective dynamic range must take measurement uncertainty
and interfering signals into account.
2. The specification might not be met at the frequencies 1.4 MHz, 4.0 MHz, 4.333 MHz, 6.167 MHz,
6.333 MHz, 25 MHz and 90 MHz.
Uncorrected System Performance
Table 10. Uncorrected system performance (correction: off)
Description | Specification | Typical |
Directivity (Option 3L3/3L4/3L5) | 25 dB | |
Directivity (Option 115, 135, 215, 235, 117, 137, 217, 237) |
20 dB (at 100 kHz to 300 kHz) 25 dB (at 300 kHz to 3 GHz) |
|
Source match (Option 3L3/3L4/3L5) |
25 dB | |
Source match (Option 115, 135, 215, 235, 117, 137, 217, 237) |
20 dB (at 100 kHz to 300 kHz) 25 dB (at 300 kHz to 3 GHz) |
|
Load match (3L3/3L4/3L5) |
15 dB (at 5 Hz to 2 GHz) 12 dB (at 2 to 3 GHz) |
|
Load match (Option 3L3/3L4/3L5, Source AC couple mode) |
10 dB (at 100 kHz to 300 kHz) 15 dB (at 300 kHz to 2 GHz) 12 dB (at 2 to 3 GHz) |
|
Load match (Option 115, 135, 215, 235, 117, 137, 217, 237) |
10 dB (at 100 k to 300 kHz) 15 dB (at 300 k to 3 GHz) |
|
Transmission tracking (3L3/3L4/3L5) |
± 1.0 dB (at 100 Hz to 3 GHz) |
± 1.0 dB (at 5 to 100 Hz) |
Transmission tracking (Option 115, 135, 215, 235, 117, 137, 217, 237) |
± 1.5 dB (at 100 k to 300 kHz) ± 1.0 dB (at 300 k to 3 GHz) |
|
Reflection tracking (3L3/3L4/3L5) |
± 1.0 dB (at 100 Hz to 3 GHz) |
± 1.0 dB (at 5 to 100 Hz) |
Reflection tracking (Option 115, 135, 215, 235, 117, 137, 217, 237) |
± 1.5 dB (at 100 k to 300 kHz) ± 1.0 dB (at 300 k to 3 GHz) |
Test Port Output (Source)
Table 11. Test port output frequency
Description | Specification | Typical |
Range (Option 3L3) Range (Option 3L4) Range (Option 3L5) |
5 Hz to 500 MHz 5 Hz to 1.5 GHz 5 Hz to 3 GHz |
|
Range (Option 115, 135, 215, 235, 137, 237) Range (Option 135, 235, 137, 237) |
100 kHz to 3 GHz 100 kHz to 1.5 GHz |
|
Resolution | 1 mHz | ± 7 ppm (5 to 40 °C) |
Source stability | ||
CW accuracy | ± 7 ppm ± 1 mHz | |
High stability option (Option 1E5) | ||
CW accuracy | ± 1 ppm ± 1 mHz | |
Stability |
± 0.05 ppm (5 to 40 °C) ± 0.5 ppm per year |
Table 12. Test port output power
Description | Specification | Typical |
Level accuracy (Option 3L3/3L4/3L5) |
± 0.8 dB (at 0 dBm, 50 MHz absolute) ± 1.0 dB (at 5 Hz to 1.5 GHz, 0 dBm, relative to 50 MHz) ± 1.5 dB (at 1.5 GHz to 3 GHz, 0 dBm, relative to 50 MHz) |
|
Level accuracy (Option 115, 135, 215, 235) |
± 0.8 dB (at 0 dBm, 50 MHz absolute) ± 1.5 dB (at 100 kHz to 300 kHz, 0 dBm, relative to 50 MHz) ± 1.0 dB (at 300 kHz to 3 GHz, 0 dBm, relative to 50 MHz) |
|
Level accuracy (Option 117, 137, 217, 237) |
± 0.8 dB (at 0 dBm, 50 MHz absolute) ± 1.5 dB (at 100 kHz to 300 kHz, 0 dBm, relative to 50 MHz) ± 1.0 dB (at 300 kHz to 2 GHz, 0 dBm, relative to 50 MHz) |
± 1.0 dB (at 2 GHz to 3 GHz, 0 dBm, relative to 50 MHz) |
Level lineality (Option 3L3/3L4/3L5) |
± 0.75 dB (at –10 to 10 dBm, 0 dBm reference) |
|
Level lineality (Option 115, 135, 215, 235, 117, 137, 217, 237) |
± 0.75 dB (at –10 to 5 dBm, 100 kHz to 300 kHz, 0 dBm reference) ± 0.75 dB (at –10 to 10 dBm, 300 kHz to 3 GHz, 0 dBm reference) |
|
Range (Option 3L3/3L4/3L5) |
–45 dBm to 10 dBm | |
Range (Option 115, 135, 215, 235, 117, 137, 217, 237) |
–45 dBm to 5 dBm (at 100 kHz to 300 kHz) –45 dBm to 10 dBm (at 300 kHz to 3 GHz) |
|
Sweep range (Option 3L3/3L4/3L5) |
–45 dBm to 10 dBm | |
Sweep range (Option 115, 135, 215, 235, 117, 137, 217, 237) |
–45 dBm to 5 dBm (at 100 kHz to 300 kHz) –45 dBm to 10 dBm (at 300 kHz to 3 GHz) |
|
Level resolution | 0.05 dB |
Table 13. Test port output signal purity
Description | Specification | Typical |
Harmonics (2nd or 3rd) |
< -20 dBc (at 100 kHz to 300 kHz, 5 dBm) < -25 dBc (at 300 KHz to 3 GHz, 5 dBm) |
|
Non-harmonic spurious | < –25 dBc (at 5 dBm) |
Test Port Input
Table 14. Test port input levels
Description | Specification | Typical |
Absolute amplitude accuracy |
< ± 3 dB (at 0 dBm) |
|
Crosstalk 1 (Option 3L3/3L4/3L5) |
–85 dB (at 5 Hz to 100 Hz) –100 dB (at 100 Hz to 9 kHz) –110 dB (at 9 to 100 kHz) –115 dB (at 100 kHz to 3 GHz) |
|
Crosstalk 2 (Option 115, 135, 215, 235, 117, 137, 217, 237) |
–100 dB (at 100 to 300 kHz) –110 dB (at 300 k to 1MHz) –115 dB (at 1 MHz to 3 GHz) |
Table 15. Test port input (noise floor)
Description | Specification | Typical |
Noise floor (Option 3L3/3L4/3L5) | ||
3 kHz bandwidth |
-80 dBm (100 kHz to 1 MHz) -85 dBm (1 MHz to 3 GHz) |
|
2 Hz bandwidth | -80 dBm (5 Hz to 100 Hz) | |
10 Hz bandwidth |
-90 dBm (100 Hz to 9 kHz) -100 dBm (9 kHz to 100 kHz) -105 dBm (100 kHz to 1 MHz) -110 dBm (1 MHz to 3 GHz) |
|
Noise floor (Option 115, 135, 215, 235, 117, 137, 217, 237) | ||
3 kHz bandwidth |
-70 dBm (100 kHz to 300 kHz) -80 dBm (300 kHz to 1 MHz) -85 dBm (1 MHz to 3 GHz) |
|
10 Hz bandwidth |
-95 dBm (100 kHz to 300 kHz) -105 dBm (300 kHz to 1 MHz) -110 dBm (1 MHz to 3 GHz) |
2. Maximum test port input level: +10 dBm
Table 16. Test port input (trace noise)
Description | Specification | Typical |
Trace noise magnitude (Option 3L3/3L4/3L5) source power level = +10 dBm |
5 mdB rms (< 10 kHz) Automatic IF bandwidth 5 mdB rms (10 kHz to 3 GHz) 3 kHz bandwidth |
|
Trace noise magnitude (Option 115, 135, 215, 235, 117, 137, 217, 237) Maximum output power level 3 kHz Bandwidth |
15 mdB rms (100 to 300 kHz) 8 mdB rms (300 kHz to 1 MHz) 5 mdB rms (1 MHz to 3 GHz) |
|
Trace noise phase (Option 3L3/3L4/3L5) source power level = +10 dBm |
0.03° rms (< 10 kHz) Automatic IF bandwidth 0.03° rms (10 kHz to 3 GHz) 3 kHz Bandwidth |
|
Trase noise phase (Option 115, 135, 215, 235, 117, 137, 217, 237) Maximum output power level 3 kHz Bandwidth |
0.09° rms (100 to 300 kHz) 0.05° rms (300 kHz to 1 MHz) 0.03° rms (1 MHz to 3 GHz) |
Description | Specification | SPD |
Stability magnitude (Option 3L3/3L4/3L5) 3 MHz to 3 GHz |
0.01 dB/°C |
|
Stability magnitude (Option 115, 135, 215, 235, 117, 137, 217, 237) 100 kHz to 300 kHz 300 kHz to 3 MHz 3 MHz to 3 GHz |
0.05 dB/°C 0.02 dB/°C 0.01 dB/°C |
|
Stability phase (Option 3L3/3L4/3L5) 3 MHz to 3 GHz |
0.1°/°C |
|
Stability phase (Option 115, 135, 215, 235, 117, 137, 217, 237) 100 kHz to 300 kHz 300 kHz to 3 MHz 3 MHz to 3 GHz |
0.5°/°C 0.2°/°C 0.1°/°C |
Table 18. Test port input (dynamic accuracy)
Accuracy of the test port input power reading is relative to –10 dBm reference input power level.
Description | Specification | Typical |
Dynamic accuracy magnitude (Option 3L3/3L4/3L5) Reference = –10 dBm |
± 0.303 dB (at 10 dBm) ± 0.087 dB (at –30 dBm) ± 2.141 dB (at –100 dBm) |
|
Dynamic accuracy magnitude (Option 115, 135, 215, 235, 117, 137, 217, 237) Reference = –10 dB |
± 0.303 dB (at 10 dBm) ± 0.087 dB (at –30 dBm) ± 2.141 dB (at –100 dBm) 300 kHz to 3 GHz ± 0.383 dB (at 10 dBm) ± 0.167 dB (at –30 dBm) ± 2.221 dB (at –100 dBm) 100 to 300 kHz |
|
Dynamic accuracy phase (Option 3L3/3L4/3L5) Reference = –10 dB |
± 2.04 ° (at 10 dBm) ± 0.58 ° (at -30 dBm) ± 16.23 ° (at –100 dBm) |
|
Dynamic accuracy phase (Option 115, 135, 215, 235, 117, 137, 217, 237) Reference = –10 dB |
± 2.04 ° (at 10 dBm) ± 0.58 ° (at –30 dBm) ± 16.23 ° (at –100 dBm) 300 kHz to 3 GHz ± 2.58 ° (at 10 dBm) ± 1.11 ° (at –30 dBm) ± 16.94 ° (at –100 dBm) 100 to 300 kHz |
