3D-сканер ATOS ScanBox Series 6 6235
High throughput in the production environment
Характеристики
Производитель
—
GOM
3D-сканер ATOS ScanBox Series 6 6235
Three models for production-accompanying quality control
In the production environment, it is important to identify, analyze and eliminate quality problems as fast as possible. For that, as many parts as possible must be completely checked in the shortest amount of time to be able to initiate targeted corrective measures at short notice and to minimize scrap. Master this challenge with ATOS ScanBox Series 6: Three different variants deliver full-field deviations between the complete actual 3D coordinates and the CAD data.
In the production environment, it is important to identify, analyze and eliminate quality problems as fast as possible. For that, as many parts as possible must be completely checked in the shortest amount of time to be able to initiate targeted corrective measures at short notice and to minimize scrap. Master this challenge with ATOS ScanBox Series 6: Three different variants deliver full-field deviations between the complete actual 3D coordinates and the CAD data.
Two working areas
A special feature of ATOS ScanBox 6235 are the two working areas that can be operated independently from each other and therefore deliver even more precise measuring results within minimum time. The rotation table can be set up parallel to the measurement.High throughput
Set up your parts and the fixtures on changing pallets outside ATOS ScanBox. The pallets are loaded quickly and reproducibly using positioning pins. This results in a high throughput of parts and is ideally suited for series production.
Loading and measuring at the same time
Quick loading and unloading
Generous entry areas allow for an uncomplicated use of loading machines such as cranes, forklift trucks or pallet trucks. ATOS ScanBox Series 6 can be loaded with large and heavy parts. The maximum load of the rotation table unit is 5000 kg.
Quick change of parts
With ATOS ScanBox 6135 and 6235, car body parts, such as trunk lids and doors, can be measured faster with a multi-part fixture because it is not necessary to change the fixture. The multi-part fixture can be easily positioned so that the attached parts can be exchanged at the front side.
With ATOS ScanBox 6135 and 6235, car body parts, such as trunk lids and doors, can be measured faster with a multi-part fixture because it is not necessary to change the fixture. The multi-part fixture can be easily positioned so that the attached parts can be exchanged at the front side.
Virtual Measuring Room in GOM Inspect Pro
The virtual measuring room (VMR) is the central control station and measurement planning software for all elements of the ATOS measuring cells. In the VMR, the real environment, i.e. robots, sensors and parts in the measurement cell, is functionally simulated in a simulation. The programming includes the kinematics, the robot paths, the part fixture and the measurement plan. Thanks to the VMR, the user can work with the system without requiring specific robot programming skills. All robot movements are simulated and checked for safety before being performed in the actual environment.