Binder jet 3D printing featuring patented Triple ACT for excellent surface quality and specialty materials, including both metals and ceramics.
The X-Series family of scalable 3D printers — the InnoventX™, X25Pro™ and X160Pro™ — feature industrial piezoelectric printheads and patented Triple ACT advanced compaction technology, which dispenses, spreads, and compacts ultra-fine powders with tight parameter controls. Triple ACT allows these open-materials systems to process metals, ceramics and more with high density and repeatability for functional, precision parts and tooling in a wide range of build areas.
The X-Series binder jet 3D prints a wide variety of materials, including metals, ceramics, and composites. This flexibility is achieved through Triple ACT which enables the use of both high- and low-flow materials, as well as small and large particle sizes. The X-Series is used to process stainless steels, tool steels, nickel alloys, aluminum and titanium alloys, metal composites and ceramics, such as silicon carbide and aluminum-infiltrated boron carbide (B4C).
With density variation across the build area, dimensional tolerances can be controlled within 1-2.5% on a first print run. With optimization for production, X-Series systems routinely achieve dimensional tolerances of less than 1%, all while maintaining post-sintered densities from 97% to better than 99% for most metals.
The X-series achieves world-class surface finish through the combined benefits of the Triple ACT system and precision binder placement. High print bed density and optimized binder placement all but eliminate binder bleed and overspray, producing excellent edge definition, surface quality, and surface finish as low as 4 µm Ra.
|
Производитель
|
ExOne |
|
Материал
|
Металл (порошок) |
|
Габариты детали
|
3/5 дм3 (250*200*100 например) |
| Виды связующего компонента | на основе - воды | растворителя | фенола |
| Внешние размеры оборудования, м | 1,203 x 1,016 x 1,434 |
| Максимальная скорость печати | 166 см3/час |
| Максимальные размеры 3D-изделий, мм | 160 x 65 x 65 |
| Минимальный размер порошка, мкм | 2 |
| Объем напечатанного изделия | 0.676 л |
| Производитель | ExOne |
| Толщина слоя печати | 30-200 мкм |
| Страна производства | США-Германия |
| Гарантия, лет | 1 |